Shop by

Category

Duncan cone 06 low fire food safe clear glaze In1001 3.5 gallon for dipping (looks blue fires clear)

Product Description

The clear glazes in this category are for applying over underglazes. The IN1001 and Pure Briliance are fully non toxic firable glazes. They fire at cone 06. They are dinnerware safe when fired at cone 06. They come in 4 oz, pints (16 oz), gallons, 3.5 gallons. This is the recommended glaze for schools and institutions. This product, like all clear glazes requires 2-3 coats in its application. Dipping glaze in gallons and larger also available . This product, like all clear glazes requires 2-3 coats in its application. To Check Viscosity in the glaze Submerge a TL497 Viscosity Cup (available in our supply Misc. section) into tank and fill with glaze. As you lift cup from glaze, begin timing. Stop timing when the steady stream of glaze begins to break and only a few drops remain. A range of 19-24 seconds is normal. If glaze remains in the cup and reading is below or within this range, or if it takes longer than 24 seconds to drain, the glaze is too thick. Add small amounts of water as needed.As it states on the home page, free shipping offer of $75 orders does not apply to cases of tiles/clay or gallon size containers. However we have set up discounted rates that will save you more than 50% off published shipping rates. When you get to the shipping page of the checkout you will see the available discounted shipping choice. Any other items in your order/cart will be shipped freight free if total order including tiles/clay/gallons are over $75. The clear glazes in this category are for applying over underglazes. The IN1001 and Pure Briliance are fully non toxic firable glazes. They fire at cone 06. They are dinnerware safe when fired at cone 06. They come in 4 oz, pints (16 oz), gallons, 3.5 gallons. This is the recommended glaze for schools and institutions. This product, like all clear glazes requires 2-3 coats in its application. Dipping glaze in gallons and larger also available . This product, like all clear glazes requires 2-3 coats in its application. To Check Viscosity in the glaze Submerge a TL497 Viscosity Cup (available in our supply Misc. section) into tank and fill with glaze. As you lift cup from glaze, begin timing. Stop timing when the steady stream of glaze begins to break and only a few drops remain. A range of 19-24 seconds is normal. If glaze remains in the cup and reading is below or within this range, or if it takes longer than 24 seconds to drain, the glaze is too thick. Add small amounts of water as needed.Only the tile/clay/gallons are weighed so you are not charged shipping on the other items if order total is over $75. If you have any questions, please email or call us.

$129.00  

$129.99

We're sorry, but this product is currently out of stock. Please check back at a later time.

Customers who bought this product also purchased