Shop by


Quik-crackle non-fired 2 oz.

Product Description

How to use Quik-Crackle

1. Base coat piece with Bisque-Stain OpaquesTM, Ultra Metallics or Liquid PearlsTM.
2. When base coat is dry, apply a smooth, even coat of Quik-Crackle. Clean brush immediately with water and Duncan Brush Cleaner, making sure no Quik-Crackle is left in the metal ferrule. Let Quik-Crackle dry for 20 mintues to one hour. Quik-Crackle can set overnight and the same exciting results will be achieved.
3. Working quickly, use a clean, soft brush to apply an even coat of a contrasting top-coat color over the dry Quik-Crackle. Choose top-coat color for best results from the Bisq-Stain Opaques line. Once the top-coat color has been applied, do not reapply more color after cracking starts. Cracking time may vary from color to color. Wait a few minutes for cracking to start.

Tips & Techniques

1. Cracking follows the direction in which the top-coat color was applied, that is, if color was swirled on, the cracks swirl. Straight strokes will give your project straight cracks.
2. Acheive large, bold cracks by applying a heaver top-coat color.
3. Achieve fine cracks by applying a thin top-coat color.
4. Acheive a fine, web cracking by sponging on top-coat color.
5. Flat Opaque brushes give the best results when applying Quik-Crackle.
6. Take your time with the project; be sure all phases are properly set or dry before proceeding to the next step.
7. When cracking has completed and the top-coat is completely dry, you can add brushstrokes or design work.
8. Seal the project with a spray or brush-on sealer.


Customers who bought this product also purchased

Snow no fire for non fired ceramics or plastercraft


Snow no fire glittering non fired 4 oz.


Os465 holly green


Os 431 white


Os452 purple


Os441 dresden flesh 2 oz


Os476 black


Thin 'n shade by duncan 2 oz.


Duncan ultra metallics 2 oz. um957 red


Os449 bright red


Duncan ultra metallics 2 oz. um959 green


Duncan ultra metallics 2 oz. um958 blue