Shop by

Category

Duncan EZ stroke underglaze low fire 011 sienna brown 1 oz.

Product Description

Learning About E-Z Stroke® Translucent Underglazes Basic Instructions 1. Apply 1 coat for translucent designs. 2. For rich depth and shading, apply additional coats. 3. Apply to greenware, unfired glaze, soft-fired bisque or bisque. 4. Fire to shelf cone 04 (06 if applied to glaze or bisque). 5. Clean up with water. 6. Always refer to label instructions for proper application and usage. Tips & Techniques 1. E-Z Strokes may be applied over most underglazes, including Cover-CoatTM and other E-Z Stroke colors, allowing the base color to show through. 2. E-Z Strokes work well with high fire, cone 5-6 and some to cone 10. As high results vary, we recommend firing a test piece. 3. For majolica, apply E-Z Stroke design work over unfired White Satin glaze. 4. As a pure pigment-based paint, E-Z Strokes is the simplest form of fired color. You can use E-Z Strokes just like watercolors, in layers of transparent/translucent, bold, pure color. And, just like watercolors, you can inter-mix all the E-Z Strokes colors. Just as for typical watercolors, these paints must be mixed with water to be applied properly to greenware or soft fired bisque for the best application. E-Z Strokes are very fragile unfired, because when the water dries out of the pigment there are no binders holding it in place. E-Z Strokes fires into the ware at an 04 or hotter cone, although most of the pigments will hold true up to a cone 10. This broad firing range allows artists to use E-Z Strokes on almost all clay bodies 5. Use E-Z Strokes to tint clay slip, most glazes, fired Snow and other E-Z Stroke colors. 6. High definition and detail can be achieved by adding water to E-Z Stroke color and using a very fine brush. Health & Safety 1. Nontoxic and lead-free. 2. Food safe when properly covered with a Duncan lead-free clear glaze.

$4.10
We're sorry, but this product is currently out of stock. Please check back at a later time.

Customers who bought this product also purchased

Trimming plastic tool for casting & clay work similar to lucy with bent one edge

Trimming plastic tool for casting & clay work similar to lucy with bent one edge

$7.91
  $4.81


Christmas tree plastic light up twist med 1'' L x 3/8'' W overall Stem: 	7/16'' L x 3/16'' Dia.(100) quantity assorted colors FREE SHIPPING ON THIS PRODUCT

Christmas tree plastic light up twist med 1'' L x 3/8'' W overall Stem: 7/16'' L x 3/16'' Dia.(100) quantity assorted colors FREE SHIPPING ON THIS PRODUCT

$19.95
  $13.41


Christmas tree plastic light up twist small 1/2'' H x 5/16'' W overall Stem: 3/8'' L x 1/8'' D assorted colors (100) quantity FREE SHIPPING ON THIS PRODUCT

Christmas tree plastic light up twist small 1/2'' H x 5/16'' W overall Stem: 3/8'' L x 1/8'' D assorted colors (100) quantity FREE SHIPPING ON THIS PRODUCT

$17.99
  $11.91


12 pc. keep n carry brush set with zippered carrying case

12 pc. keep n carry brush set with zippered carrying case

$44.18
  $35.11


Ctk7 tool set

Ctk7 tool set

$35.95
 


Stopper, plug white #12 Rubber fits 2" opening

Stopper, plug white #12 Rubber fits 2" opening

$2.21
 


Al10 10

Al10 10

$12.11
 


Dipping tongues

Dipping tongues

$17.11
 


Ceramic bisque unpainted bi6060 small cross bead with hole for necklace 1¼" L x 1" W x ¼" H

Ceramic bisque unpainted bi6060 small cross bead with hole for necklace 1¼" L x 1" W x ¼" H

$2.99
  $0.61


Ceramic bisque unpainted bi6060 small cross bead with hole for necklace 1¼" L x 1" W x ¼" H

Ceramic bisque unpainted bi6060 small cross bead with hole for necklace 1¼" L x 1" W x ¼" H

$2.99
  $0.61


Ceramic bisque unpainted bi6060 small cross bead with hole for necklace 1¼" L x 1" W x ¼" H

Ceramic bisque unpainted bi6060 small cross bead with hole for necklace 1¼" L x 1" W x ¼" H

$2.99
  $0.61