Pottery Coat Stuccos are a unique, highly-textured product that produces a rough finish similar to cement. These products are available in the same colors as the original Pottery Coat. Think of them as Pottery Coat kicked up a notch. How do I apply Pottery Coat™ Stuccos? Stir Pottery Coat™ Stuccos using a stir stick. Recap the jar and then shake well. Before apply color, wipe cone 04 bisque with a moistened sponge to remove any dust. Apply three even applications using the largest brush to cover the area. Mayco recommends using a soft fan brush (CB-618 or RB-140). After applying three even applications, check the piece to make sure the texture is evenly distributed. Apply texture in areas that may have been left bare. How are Pottery Coat™ Stuccos fired? Always allow piece to dry until you can no longer feel any moisture or the piece no longer feels cold to touch. If there is no glaze on the surface that is placed on the kiln shelf, it is not necessary to stilt the piece when firing. Properly fire to shelf cone 06. Pottery Coat Stuccos can be high fired, but turn glossy. Consult Mayco’s High Fire Guide for surface changes. Are Pottery Coat™ Stuccos Food Safe? Although Pottery Coat™ Stuccos are non-toxic and thus food safe according to FDA standards, they are not practical for food containers due to porous surface characteristics. What other combinations can be use? For best results, use Pottery Coat Stuccos as a base or with other Pottery Coat bases. You may then apply other non-toxic glazes such as Pottery Cascade, Crystalites, Stroke & Coat, Elements or Elements Chunkies for great glaze combinations and techniques. You can apply the other non-toxic products by brushing, spattering, plopping, or sponging for unique effects. Will Pottery Coat™ Stucco scratch furniture? Yes. If piece is to be placed on furniture, you should apply felt tabs to the bottom to protect furniture from the rough texture of the glaze. You can also glaze the bottom of a piece with the corresponding color of Pottery Coat. Can Pottery Coat™ Stucco be used for outdoor use? For pieces designed for outdoor use, apply one coat of AC-301 Repellent Sealer™. Wait twenty-four hours and apply another coat of the sealer.